[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: AW:

Lourdes,

Now I am confused. Are you saying that the presence of an empty cnfgtr.trn file in the project's directory causes an integer overflow?

I would be glad to see the project and reproduce that problem myself. Could you please send the project to me (not to the list)? Also, some problems occurring with empty cnfgtr.trn files were fixed in TRNSYS 15.3.00. Are you using that release?

Kind regards,

Michaël Kummert



on 2004-02-26 11:03, Lourdes Gonzalez Martinez wrote:

Hola Peter



thanks a lot. 


That works perfectly.



Lourdes Gonzalez




At 16:20 26/02/04 +0100, you wrote:

Hola Lourdes,

try to find an empty file called CNFGTR.TRN in your project folder and 

delete it. This file is generated sometimes when the simulation is
corrupted. When there is no such file in your project folder TRNSYS uses
the right one with the same name in the base folder c:\trnsys15 .

I Hope that works!

Best regards and good luck with your big project!

Peter

-------------------------------------
German Aerospace Center (DLR)
Institut of Technical Thermodynamics
Solar Research
Dipl.-Ing. Peter Schwarzboezl
Project Manager

Porz-Wahnheide
Linder Hoehe 51147 Koeln 

Tel.: 02203 601-2967
Fax.: 02203 66900
email: peter.schwarzboezl@xxxxxx
Internet: http://www.dlr.de
------------------------------------

-----Ursprüngliche Nachricht-----
Von: owner-trnsys@xxxxxxxxxxxxxxxxxxx


[mailto:owner-trnsys@xxxxxxxxxxxxxxxxxxx] Im Auftrag von Lourdes Gonzalez
Martinez

Gesendet: Donnerstag, 26. Februar 2004 15:59
An: trnsys@xxxxxxxxxxxxxxxxxxx
Betreff: 


Hello TRNSYS user,

My computer works with Windows 98 and the TRNSYS version is the 15.0.

I work with parabolic trough collector models and now I have a problem 

with my last project. It is a big project with ten macros. These macros
have got some models developed in my work group. This project was working
perfectly, but now (without changes) it does not run and give me the
message: "integer overflow". The project is not corrupt because I can save
it. In any case I try the next solution without positive result.

1.- I made a "copy" and "paste" of the project and save it with other 

name, but the answer was the same.

2.- I ran the project (*.dck file) in TRNSHELL.
3.- In IISiBat I "Import TRNSYS input file" (*.dck), and save with other


name.

If I save the project (with the same name) in other directory, it run 

correctly. I do not understand anything.

Do you know why?

Thanks a lot.

Lourdes Gonzalez.

_____________________________________________

Energía Solar Térmica de Media Temperatura.
Dto. de Energías Renovables. PSA-Ciemat.

Avda. Complutense 22
E-28040 Madrid
Tel: (+34) 91 346 60 49
Fax: (+34) 91 346 60 37

E-mail: lourdes.gonzalez@xxxxxxxxx
http://www.ciemat.es
http://www.psa.es ________________________________________________




_____________________________________________

Energía Solar Térmica de Media Temperatura.
Dto. de Energías Renovables. PSA-Ciemat.

Avda. Complutense 22
E-28040 Madrid
Tel: (+34) 91 346 60 49
Fax: (+34) 91 346 60 37

E-mail: lourdes.gonzalez@xxxxxxxxx
http://www.ciemat.es
http://www.psa.es
________________________________________________




--
_________________________________________________________

Michaël Kummert

Solar Energy Laboratory - University of Wisconsin-Madison
1303 Engr Res Bldg, 1500 Engineering Drive
Madison, WI 53706

Tel: +1 (608) 263-1589
Fax: +1 (608) 262-8464
E-mail: kummert@xxxxxxxxxxxxx

SEL Web Site: http://sel.me.wisc.edu
TRNSYS Web Site: http://sel.me.wisc.edu/trnsys