[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [TRNSYS-users] Problem mit Strahlungsrechner



Florian,

,um mein TRY-Wetterfile auszulesen verwende ich den Type9d Data reader . Im Wetterfile ist die direkte únd die diffuse Strahlung auf eine hori.Fläche gegeben.(W/m2) Mit dem Strahlungsrechner 16e (Beam and diffuse known/ no radiation smoothing) lasse ich mir die auftreffende Strahlung auf drei verschiedene Oberflächen berechnen. Die ausgegebenen Werte Gesamtstrahlung, Beam und diffuse auf die Horizontale sind soweit richtig , die auf die drei anderen Oberflächen ergeben keinen Sinn, und liegen oberhalb der Solarkonstante.


My very basic German tells me that you have a problem with Type 16 giving unreasonably high radiation levels on tilted surfaces with your TRY data file (Now I hope everyone sees the point of having Type numbers instead of names!).
The problem might be in the data file or in your deck (connection, start time / time step). The fact that you mention "W/m2" may also indicate that you just have a unit problem (TRNSYS uses kJ/hm2 and I typically prefer to stick with that, even though Type16 will work with any consistent set of parameters/inputs). If the problem persists you should send your deck and weather file to your distributor.


Kind regards,

Michaël Kummert


-- _________________________________________________________

Michaël Kummert

Solar Energy Laboratory - University of Wisconsin-Madison
1303 Engr Res Bldg, 1500 Engineering Drive
Madison, WI 53706

Tel: +1 (608) 263-1589
Fax: +1 (608) 262-8464
E-mail: kummert@xxxxxxxxxxxxx

SEL Web Site: http://sel.me.wisc.edu
TRNSYS Web Site: http://sel.me.wisc.edu/trnsys
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@xxxxxxxxxxxxx
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users