[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] Problem with TYPE190 (HYDROGEMS wind turbine)
- Date: Tue, 12 Oct 2004 11:44:50 -0500
- From: Michaël Kummert <kummert@xxxxxxxxxxxxx>
- Subject: Re: [TRNSYS-users] Problem with TYPE190 (HYDROGEMS wind turbine)
Todd,
I'm using TRNSYS 15 with IISiBat 3 to build a model of a Remote Area Power
System (RAPS) with two different types of wind turbine (both modeled using
Type 190 from the HYDROGEMS library). The .dck file has no errors, but the
.lst file shows one error...
***** ERROR ***** TRNSYS ERROR # 71
LOGICAL UNIT FOR ASSIGN STATEMENT HAS BEEN PREVIOUSLY ASSIGNED
*|? File with WECS parameters? |1000
It looks like you did not change the logical unit number (par(7)) in
Type 190. All logical unit numbers must be given a unique value.
I hope this helps,
Michaël Kummert
--
_________________________________________________________
Michaël Kummert
Solar Energy Laboratory - University of Wisconsin-Madison
1303 Engr Res Bldg, 1500 Engineering Drive
Madison, WI 53706
Tel: +1 (608) 263-1589
Fax: +1 (608) 262-8464
E-mail: kummert@xxxxxxxxxxxxx
SEL Web Site: http://sel.me.wisc.edu
TRNSYS Web Site: http://sel.me.wisc.edu/trnsys
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@xxxxxxxxxxxxx
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users