Component 213: Plenum by HVACSIM+
General Description
The output of this component is simply the sum of its inputs. The
single parameter, n, specifies the number of input flow rates to be summed. Up
to ten flow rates may be added together. Ten input flow rates are required by
the model, but only the first n are summed. The remaining inputs are ignored.
Nomenclature
n - number of input mass flow rates (1 <= n <= 10)
wi - ith input mass flow rate (kg/s)
wout - output mass flow rate
Mathematical Description
wout = w1 + w2 + ... + wn
NOTE: Inputs (n + 1) through 10 must be specified in the simulation, but are
ignored. Only the first n inputs are used.
Component 514 Configuration
Inputs Description
1 w1 - first mass flow rate
2 w2 - second mass flow rate
:
n wn - nth mass flow rate
:
10 w10 - tenth mass flow rate
Outputs Description
1 wout - outlet mass flow rate
Parameters Description
1 n - number of input mass flow rates
Reference:
1. HVACSIM+ Building Systems and Equipment Simulation Program Reference
Manual (NBSIR 84-2996)
Daniel R. Clark
United States Department of Commerce
National Institute of Standards and Technology
Gaithersburg, Maryland 20899-0001