[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re:
the solution is written in 'formulation of component models' :
"if a user written component has more than 20 outputs : info(6) must be
set to the correct value".
it's OK now.
thanks
At 12:40 07/03/02 -0600, you wrote:
>Gilles,
> Are the values shown in the online and in the printer very different
>from each other? Keep in mind that when a printer writes a value to a file,
>that value is the average value of the output over the timestep. The online
>shows a linear interpolation between the average values at consecutive
>timesteps. Consequently the online shows smoothe curves when in reality the
>output is more stepped.
>Cheers,
> David
>
>At 01:32 PM 3/7/2002 +0100, you wrote:
>>Hello ,
>>I use exactly the same variables with "printer" and "on line printer" .
>>But the values are different for 'Trsrdc' . The printer values are wrong.
>>Does anabody has a solution for that strange phenomenon ?
>>Thank you ,
>>Gilles Fraisse
>>
>>************************************************************************
>>UNIT 23 TYPE 25 SORTIES PRINTER
>>PARAMETERS 5
>>*step start stop logical_unit units
>>1 1 1000 18 2
>>INPUTS 3
>>Trsrdc Trseta Te
>>Trsrdc Trseta Te
>>************************************************************************
>>UNIT 5 TYPE 65 ON LINE PRINTER
>>PARAMETERS 14
>>*1 2 3 4 5 6 7 8 9 10 11 12 13 14
>>3 0 -10 40 0 1000 1 1 3 1 5 1 2 1
>>INPUTS 3
>>Trsrdc Trseta Te
>>Trsrdc Trseta Te
>>LABELS 4
>>[C]
>>[C]
>>[C]
>>[C]
>>************************************************************************
>>
>>
>>
>>
>>°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
>>Gilles FRAISSE
>>Laboratoire Génie Civil et Habitat
>>Ecole Supérieure d'Ingenieurs de Chambéry (ESIGEC)
>>Campus Scientifique Savoie Technolac
>>Université de Savoie - 73376 - Le Bourget du Lac Cedex (France)
>>Téléphone +33 (0)4 79 75 88 95
>>Télécopie +33 (0)4 79 75 81 12
>>°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
>
>***************************************************************************
******
>Thermal Energy System Specialists (TESS)
>David BRADLEY 2916 Marketplace Drive - Suite 104
>Project Engineer Madison, WI 53719
>Phone: (608) 274-2577 USA
>Fax: (608) 278-1475
>E-mail: bradley@tess-inc.com
>Web Page: www.tess-inc.com
>
>"Providing software solutions for today's energy engineering projects"
>****************************************************************************
>*****
>
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
Gilles FRAISSE
Laboratoire Génie Civil et Habitat
Ecole Supérieure d'Ingenieurs de Chambéry (ESIGEC)
Campus Scientifique Savoie Technolac
Université de Savoie - 73376 - Le Bourget du Lac Cedex (France)
Téléphone +33 (0)4 79 75 88 95
Télécopie +33 (0)4 79 75 81 12
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°