Re: TRNSYS WITH WINNT

[David Bradley <bradley@xxxxxxxxxxxxxxx>]

Samuel,
TRNSYS simulations should work on both Windows 95 and Windows NT machines
without modification. However, I have noticed that you sometimes have to be
more careful with ASSIGN statements in Windows NT and provide the full path
name to external files starting with the drive letter. For example, in
Windows 95, you can use \weather\wdata.dat. In Windows NT, you will be
better off with c:\trnwin\weather\wdata.dat.
This is only a guess as to the problem. If you open your .lst file with a
text editor and can tell me what the error says then I'd be happy to try
and give you a better answer.

Yours,
	David

At 10:12 AM 5/11/99 -0300, you wrote:
>Hi everyone
>
>I developed some simulation systems using models of IISIBAT TRNSYS 14.2
>in Windows 95. I install  the Windows NT Workstation in my micro and
>when I try to use my old systems I cannot perform any simulation ("one
>error was found in the deck check the listing file for more
>information"). Note that I didn't make any modification and the systems
>are still running in a computer with Windows 95.
>Thanks in advance
>
>Samuel
> 
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 
David BRADLEY
TRNSYS Engineer			Phone: (608) 263-1589
Solar Energy Laboratory	bradley@sel.me.wisc.edu
1500 Engineering Drive		Fax: (608) 262-8464
Madison, WI  53706

The SEL Web Site can be seen at: http://sel.me.wisc.edu
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -