[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re:



At 21:18 2002-09-27 +0900, you wrote:
>
>Dear TRNSYS Users,
>
>I am studying TYPE28 SIMULATION SUMMARY.
>I can't understand the meaning of operation code(PARAMETRES 5(1) to
PARAMETERS 17(-4)) in as follows TRNSYS DCK file
>
>```````````````````````````````````````````````````````````````````````````
````````````````````````````````````````````````````````````
> Daily summaries of radiation on the collector surface, collector energy
gain, collector efficiency, and average tank temperature are desired.
> Radiation on the collector surface is available from UNIT 16, OUTPUT 1
(16,1), Collector energy gin from UNIT 1, OUTPUT 3, (1,3), and tank
temperature from UNIT4, OUTPUT1, (4,1).
> The collector ares is known to be 50. Teh following lines produce the
desired output.
>
> UNIT 28 TYPE28 SIMULATION SUMMARY
> PARAMETERS 17
> 24  0  10000  0
> 1  0  -3  0  -1  50  1  -3  2  -4  0  -2  2  -4
> INPUTS 3
> 1,3 16,1 4,1
> LABELS 4
> QCOL  HCOL  EFFIC  TAVRG
>
>Output of th following form will be printed every 24 hours of simulation.
>
>SIMULATION SUMMARY FOR TIME = 0.00 TO 24.00
>
> QCOL            HCOL         EFFIC         TAVRG
> 3.159+05       5.18+05      5.258-01      3.301+01
>```````````````````````````````````````````````````````````````````````````
```````````````````````````````````````````````````
>
>Does anyone have experience with SIMULATION SUMMARY TYPE-28:
>In advance, thanks for anybody providing answer.
>
>J. U. Park
>

Hello,

I would recommend to open the manual, chapter 4.10.4 Type 28 Simulation
Summary, on the second page the description of the operation codes starts.
This should help you to understand the meaning of the parameters.

Something general to all connected users:

I prefer to share TRNSYS problems and their solutions with users all around
the world but in my opinion this is not the surface to learn TRNSYS. So
PLEASE, before sending an email to all the connected users: open the manual
and read the desription, this solves most of the problems you have and
furthermore helps to understand TRNSYS better and to gain a lot of
experience. And it helps all of us. Thanks in advance and GOOD LUCK!

Best wishes

Rainer
Besök EKOS hemsida på: http://www.du.se/ekos/

**********************************************************
*	Dipl.-Ing. Rainer Tepe			         *
*	Högskolan Dalarna		                 *
*	Avdelningen för energi, miljö och byggande	 *
*	Solar Energy Research Center SERC                *
*	Forskargatan 6			                 *
*	S-781 88 Borlänge		                 *
*	Tel. 0046 23 778703		                 *
*	Fax. 0046 23 778701		                 *
*	email rte@du.se			                 *
*       mobil 070 3478601                                *
**********************************************************