AW: Error Surface pane temperature out of bounds

["hotline" <hotline@xxxxxxxxxxxxxx>]

Dear Maurice, 
normally this comes from a wrong connection.
Here are some hints to check what's wrong.

1) Set the TSKY= Tamb the most common mistake is a wrong sky temperature
2) look in the bui-file which orientation the window  (surface17 zone 2) has.
   Set the radiation for this orientation to 0 to check if there is a wrong connection.
3) check the raditive part of your heating and gains

with kind regards,

your TRNSYS Hotline Team

T.Welfonder, M.Rudolph


Mailto:Hotline@transsolar.com; http://www.transsolar.com
--------------------------------------------------------------------------------------------------------------------
TRNSYS - course 1 :	Introduction into the work with TRNSYS
Basics for dynamic simulations
generating systems with IISiBat (solar system for domestic hot water) 
10. + 11. November 2003
Price:	_ 900,- per person, + VAT
--------------------------------------------------------------------------------------------------------------------
TRNSYS - course 2 :	Building Simulations with TRNSYS
Input of  building data in PREBID
Modelling of heating, cooling and control systems in IISIBAT
how to do checking of  the results
(for experienced TRNSYS-users, or participants of course 1)
26. +  27. November 2003
Price:	_ 900,- per person, + VAT
--------------------------------------------------------------------------------------------------------------------
TRNSYS - course 4 :	airflow simulation in buildings TRNFLOW
Theory and Basics
introduction into the module TRNFLOW
Integration of TRNFlow in TRNSYS 15
available TRNFlow airflow components 
Outputs of TRNFLOW
Example 
adding the different TRNFLOW components to an  existing multi zone model of a office with double fassade
changes in the TRNSYS input file for TRNFLOW simulations
making different simulation
hints  and checking of the results
(for experienced TRNSYS-users, or participants of course 2)
28. November 2003
Price:	_ 650,- per person, + VAT
--------------------------------------------------------------------------------------------------------------------
Information about TRNFLOW can be found at: http://www.transsolar.com/ts/indexflo.htm.
if you need any further information please contact hotline@transsolar.com.

  




-----Ursprüngliche Nachricht-----
Von: Jong, M.J.M. [mailto:jong@ecn.nl] 
Gesendet: Donnerstag, 16. Oktober 2003 09:40
An: TRNSYS E-mail group (E-mail)
Betreff: Error Surface pane temperature out of bounds


Dear TRNSYS users,

At the moment I am simulating an old office building (with TRNSHELL 3.070, date 04/11/03). The office building is provided with single pane glass (window ID nr. 1001 from the standard American library in Prebid). For every zone inwhich the single pane glass is included, I get the error message:

***** ERROR *****        TRNSYS ERROR 
 TYPE 56, ZONE   2, SURFACE 17 PANE TEMPERATURE OUT OF BOUNDS AT TIME
1.00000

Does anybody know how to solve this error ?

Regards,

Maurice Jong.

============================================================================
======

Maurice Jong
ECN - Energy research Centre of the Netherlands		Department: DEGO
P.O. Box 1    1755 ZG  Petten				Country:   The
Netherlands
Telephone:    +31 (0)224 564938				Fax:       +31
(0)224 568966
E-mail: jong@ecn.nl					Internet:
http://www.ecn.nl/dego

============================================================================
======