Re: Is there a type for "mixing tank" ?

[Jeff Thornton <thornton@xxxxxxxxxxxx>]

At 01:12 PM 1/13/2004 +0100, you wrote:

I work on a geothermal heat pump system and I need a type which models a ?bouteille casse pression? in French or a ?mixing tank? in English (I have a doubt concerning the translation). It is a tank which has the characteristics following :
-       the storage volume is low (50 litres in my case)
-       there is not heating or cooling element
-       there is not mixing element
-       in my case there are 4 tubes on the source side (in other words 2 enters which are the source side and each enter has 2 tube)   and 2 tubes on the load side (for example these two tubes are connected on a water/water heat pump), have a look a these drawing :

I

Valentin,

We have written a new storage tank model (Similar to the type 524 which
you probably have from our TESS library) which will allow you to study
the tank you have described above.  This new model will be released
with Version 16 of TRNSYS and Version 2 of the TESS libraries in May of
2004.  We could make the model available to you earlier if you have
a need for it.  The model will come with source code, an example
showing its use and a complete technical description of the model. 
Let me know if you are interested.

Jeff

*********************************************************************************
Thermal Energy System Specialists (TESS)
Jeff Thornton                                   2916 Marketplace Drive
Principal                                       Suite 104
Phone:  (608) 274-2577                  Madison WI 53719
Fax:  (608) 278-1475                            USA
E-mail:   thornton@xxxxxxxxxxxx                 
Web Page:       www.tess-inc.com

"Providing software solutions for today's energy engineering projects"
*********************************************************************************