[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [TRNSYS-users] hot water consumption-IEA Task 26
- Date: Thu, 02 Sep 2004 15:08:01 +0200
- From: Werner Keilholz <werner@xxxxxxx>
- Subject: Re: [TRNSYS-users] hot water consumption-IEA Task 26
Florian Hafner wrote:
thanks ,
but if i import the input file, the pictures of the tanks and the
names of the parameters and imputs,etc. disappears. Everything is
then parameter1,...2....3,.....
Cheers , floh
This is because the import function can not recognize which variant
(a,b,c,...) of the
storage tank is used. Propably the 'Write IISiBat commands' flag was
switched OFF
in IISiBat when you made this deck.
To get the icon and variable names back, you can use the Edit/Replace
function,
but you should check if the configuration after change is correct
(parameters, inputs,
outputs ...). And make a backup before you try ...
Werner
David Bradley wrote:
Florian,
One thing you might try is to open your .tpf project, have IISiBat
write the deck (it doesn't matter if you let it run the simulation
run). Then create a new IISiBat project and select "Import TRNSYS
Input file" and browse until you find the deck that was just created.
I have often found that to avoid the "failed to save" problem.
Cheers,
David
At 01:42 PM 8/30/2004 +0200, Florian Hafner wrote:
Hi Werner
Thanks for your help at first.
Up to now i have used the type 14b "Time Dependent Forcing
Function: Water Draw" for my simulation, and it works. so i think ,
the simulation is.o.k .
Now i have tried to use the DHW load profiles in stead of the type
14b. i did copy my tpf-file and try to change it,and this does
not work.
so maybe someonoe has an idea
thanks flo
Werner Keilholz wrote:
Hi Florian,
I wouldn't think this problem is specific to the data reader - it
looks like there is
some problem in your project in the first place.
I suggest to try the usual recovery method (select everything and
paste into a new
project, or re-import the .dck file if you have one).
Werner
Florian Hafner wrote:
hi,
i try to use the DHW load profiles that were used in IEA / SHC
Task 26.
cause of this i need a second data reader . the problem is, that
if i use a scond data reader ,...."failured to saved" game over.....
thanks
flo
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@xxxxxxxxxxxxx
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@xxxxxxxxxxxxx
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
****************************************************************************************
Thermal Energy System Specialists (TESS), LLC
David BRADLEY 2916 Marketplace Drive -
Suite 104
Partner Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley@xxxxxxxxxxxx
Web Pages: http://www.tess-inc.com and http://www.trnsys.com
"Providing software solutions for today's energy engineering projects"
****************************************************************************************
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@xxxxxxxxxxxxx
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users
--
/ \____ Werner Keilholz, Software Development Group Leader
\____/ CSTB Sophia Antipolis, SAIL
/ \____ s-mail: BP 209, 06904 SOPHIA ANTIPOLIS, F R A N C E
\____/ phone: +33 (0)4 93 95 67 00 -- fax: +33 (0)4 93 95 67 33
/ \____ Mailto:werner@xxxxxxx -- ASPAM=antispamwpk42
\____/ http://evl.cstb.fr/english/team/WK/werner.htm
WARNING : Email is not a reliable medium. Never asume that any
email you send is actual read by a human being.
_______________________________________________
TRNSYS-users mailing list
TRNSYS-users@xxxxxxxxxxxxx
https://www.cae.wisc.edu/mailman/listinfo/trnsys-users