Re: Can't load TRNSYS

["David Bradley" <bradley@xxxxxxxxxxxxxxx>]

Yan,
 My guess is that the LELISP variable did not get set during
installation. To check, open your autoexec.bat file and make sure that
the following line is in place:
SET LELISP = x:\TRNWIN\IISIBAT2
where 'x' refers to the drive onto which you installed TRNSYS. Once the
line is in the autoexec, reboot your computer and you should have no
problem logging into IISiBat.
Cheers,
David

At 18:10 5/8/00 +0100, you wrote: 
> We are running Windows NT SERVICE
> PACK 3, PII 300, 128Mb RAM on one of our university computers with TRNSYS
> 14.2.
>  
> We get as far as the main TRNSYS log-in screen but
> from here on the program will not run.  In the Le-Lisp window the
> following message appears:
>  
>     ** windows_new_create_graph_env: not a fixnum:
> left-ptr**
>  
> Can you advise
>  
> Many thanks
>  
> Yan Kadis
> Brunel University
> Uxbridge
> West London
> yianno.kadis@brunel.ac.uk

---------------------------------------------------------------

David BRADLEY

1500 Engineering Drive   ph: +1 608 263 1589

Madison, WI          fax: +1 608 262 8464

53706

URL: http://sel.me.wisc.edu/trnsys

---------------------------------------------------------------