[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
pasive cooling sytem and TYPE56 vs TYPE19
- Date: Mon, 18 Jun 2001 00:58:48 -0400
- From: "Javier A. Lopéz U." <archipielago@xxxxxxxxx>
- Subject: pasive cooling sytem and TYPE56 vs TYPE19
En blanco Apreciated trnsys users;
I'm working with a pasive cooling sytem on a roof zone, this system adds
an evaporative heat in this area, i'd like to know how to add this heat to
the type56. In the prebid interfase i can use a "wall gain" but this is not
my situation, because the evaporative heat i work with must be on the
exterior surface of the roof.
I would also like to know if the difference beetwen a simulation made
with type19 and type56 for a single zone is really significant, because the
use of type56 is much more easyer thanks to prebid interfase.
I would apreciate any information regarding these subjects, and if
anyone is researching on cooling or heating through walls.
Sincelery...
Javier López
University of Zulia
Maracaibo-Venezuela
PD: I'm using TRNSYS 14.2 version