Re: AW: humidity calculation

["Robert Kouba" <kouba@xxxxxxxxxxxxxxxxx>]

Unfortunatly not yet....
Regards
Robert Kouba

At 10:00 02.07.02 +0200, you wrote:
>Dear Mr. Kouba,
>
>some time ago you have sent a question about the humidity calculation with
>TRNSYS. Since I work at a similar problem I would like to know if you have
>received an answers.
>
>Thanks in advance
>
>Robert Himmler
>
>
>*************************************************************
>
>Steinbeis-Transferzentrum Energie-, Gebaude- und Solartechnik
>TU Braunschweig - Institut fur Gebaude- und Solartechnik
>Dipl.-Ing. Robert Himmler
>Kopenickerstr. 48 - 49 (im DAZ)
>10179 Berlin
>
>Tel 030/278789-31
>Fax 030/278789-60
>
> > -----Ursprungliche Nachricht-----
> > Von: owner-trnsys@relay.doit.wisc.edu
> > [mailto:owner-trnsys@relay.doit.wisc.edu]Im Auftrag von Robert Kouba
> > Gesendet: Freitag, 29. Marz 2002 14:43
> > An: trnsys@relay.doit.wisc.edu
> > Betreff: hunidity calculation
> >
> >
> > Dear collegues,
> >
> > I am trying to include a humidity calculation in the simulation for an
> > office building utilizing
> > the simple humidity model provided within TYPE56. To do this I
> > have to choose
> > an effective mass ratio M_eff/M_air which according to the
> > handbook should
> > be chosen
> > between 1 and 10. Does anyone have any experience in choosing this
> > parameter and in particular how to
> > roughly relate it to the actual building set-up (plants,
> > furniture, etc...).
> >
> > Thanks in advance and regards
> > Robert Kouba
> >
> >
> > Robert Kouba
> > Institute for thermal engineering
> > Div. Solar Energy and
> > Thermal Building Simulation
> >
> > Graz University of Technology
> > Inffeldgasse 25/B
> > A.-8010 Graz, Austria
> > Tel: +43(0)316 873-7314 or 7306
> >