Problems with second TYPE 45

["Juan Pablo Salazar" <jsalazar@xxxxxxxxxxxxxxxx>]

Dear TRNSYS Users,
 
I am still getting the following error with my second TYPE 45 (now TYPE 145) component.
 
 
***** ERROR *****        TRNSYS ERROR # 103
 UNIT  23 TYPE 145
  10 INPUTS WERE SPECIFIED,  5 ARE REQUIRED
 CHECK COMPONENT CONFIGURATION
 
 
 ***** ERROR *****        TRNSYS ERROR # 103
 UNIT  23 TYPE 145
  39 PARAMETERS WERE SPECIFIED, 11 ARE REQUIRED
 CHECK COMPONENT CONFIGURATION
 
 
 ***** ERROR *****        TRNSYS ERROR # 103
 UNIT  23 TYPE 145
  10 INPUTS WERE SPECIFIED,  5 ARE REQUIRED
 CHECK COMPONENT CONFIGURATION
 
 
 ***** ERROR *****        TRNSYS ERROR # 103
 UNIT  23 TYPE 145
  39 PARAMETERS WERE SPECIFIED, 11 ARE REQUIRED
 CHECK COMPONENT CONFIGURATION
 
As specified in the “Red Book”, not to be mistaken with another “Red Book”, namely that of Bilbo Baggins, the INFO array values from position 1 thru 5 are read from the DECK file. This is obviously working because I’m getting the error message with the right number of inputs and parameters that are required by TYPE 45. So where does this information of 5 inputs and 11 parameters come from? 
 
I also have the non-standard TYPE144 (Swimming Pool) and it assigns the NI, NP and ND values within it’s source code, overwriting values that may have been read from the DECK file. May this be the solution?
 
Please tell me if what I wrote is just a bunch of nonsense!
 
Best regards,
Juan Pablo de L. C. Salazar