[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: run alltrn32.bat (version 14.2)
<Werner : I remember at one point, a long time ago, the param.inc
file was not included in updates for 'security reasons'.
In my TRNSYversion , the 'param.inc' file is already in the directory
trnwin\kernal.
<David : You can check by opening the code and verifying that the
line:INCLUDE '../kernal/param.inc' exists
All the files *.for (HPLOT.FOR , summary.for , map.for , type10.for
...) have INCLUDE 'param.inc' and not INCLUDE '/kernal/param.inc'.
I have copied the param.inc file into the trnwin directory. It doesn't
work.
I can write INCLUDE 'kernal\param.inc' in all the *.for files ...
but it will need a "very" long time. And I don't remind having
already done that before.
Can the problem come from windows XP ? As I use windows XP, I have
written in autoexec.nt (répertoire c:\I386) what I was writing in
autoexec.bat (when I was using windows 95 ... and when it was working)
:
SET LELISP=C:\trnwin\iisibat2
SET PATH=c:\progra~1\micros~2\df98\bin;"%PATH%"
SET INCLUDE=c:\progra~1\micros~2\df98\include;"%INCLUDE%"
SET LIB=c:\progra~1\micros~2\vc98\lib;"%LIB%"
I have tried to write these lines with "poste de
travail/avancé/variable environnement/variable système" too.
I have tried to replace "progra~1\micros~2" by "Program
Files\Microsoft Visual Studio" too.
nb : I already managed to make trnsys working ("rebuild") with
windows XP. But it was not a "clean" method : I had copy the
windows 95 trnwin directory (of my former computer) to my new computer
(windows XP).
I hope somebody will help to find the solution of my problem ... I only
want to install Trnsy on my computer (with the cd rom).
Thanks
Gilles
A 13:18 02/12/2003 -0600, vous avez écrit :
Gilles,
The param.inc file (in TRNSYS 14) was located in the
\trnwin\kernal directory. It was moved with the release of TRNSYS 15 to
the \trnsys15\include directory. If you have TRNSYS 14.2 installed in its
\trnwin directory then all the TRNSYS 14 source code files should point
to the correct location. You can check by opening the code and verifying
that the line:
INCLUDE '../kernal/param.inc'
exists and that param.inc is indeed inside the kernal directory.
Kind regards,
David
At 06:38 PM 12/2/2003 +0100, Gilles Fraisse wrote:
hello trnsys users ,
after several problems I have had to install trnsys 14.2 again. When I
use rebuild (before using new TYPEs), I have the error "can not open
include file param.inc" for many fortran programs (hplot ...) which
are already installed in TRNSYS. Where can I indicate the location of
param.inc for all these fortran programs ?
thanks for any help
Gilles
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
Gilles FRAISSE
LOCIE - Equipe Génie Civil et Habitat
Ecole Supérieure d'Ingenieurs de Chambéry (ESIGEC)
Campus Scientifique Savoie Technolac
Université de Savoie - 73376 - Le Bourget du Lac Cedex (France)
Téléphone +33 (0)4 79 75 88 95
Télécopie +33 (0)4 79 75 81 44
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
****************************************************************************************
Thermal Energy System Specialists (TESS)
David
BRADLEY
2916 Marketplace Drive - Suite 104
Project
Engineer
Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley@tess-inc.com
Web Pages:
http://www.tess-inc.com
and
http://www.trnsys.com
"Providing software solutions for today's energy engineering
projects"
****************************************************************************************
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
Gilles FRAISSE
LOCIE - Equipe Génie Civil et Habitat
Ecole Supérieure d'Ingenieurs de Chambéry (ESIGEC)
Campus Scientifique Savoie Technolac
Université de Savoie - 73376 - Le Bourget du Lac Cedex (France)
Téléphone +33 (0)4 79 75 88 95
Télécopie +33 (0)4 79 75 81 44
°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°