[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Reg:Warning related to vartype
- Date: Tue, 28 Oct 2003 09:50:37 -0600
- From: David Bradley <bradley@xxxxxxxxxxxx>
- Subject: Re: Reg:Warning related to vartype
Dear Sharath,
Your outputs will not be affected. However, the warning is telling you
that in the first case, you have connected a control function output to a
dimensionless input. That should be quite fine. In the second case, an
output of Type164 has the unit code SF1 - which does not seem to be a
standard unit code. This output is connected to a temperature input and is
expected to be in units of degrees C. You can see a list of the standard
unit codes on pages 3-33 to 3-38 in the main TRNSYS manual.
Kind regards,
David
At 07:38 AM 10/28/2003 -0800, you wrote:
Dear TRNSYS-Users,
I am working on Renewable Energy Fuel system model. When I run the program
the
warnings I get in the *.list file are
***** WARNING *****
UNIT/TYPE/INPUT/VARTYPE CONNECTED TO UNIT/TYPE/OUTPUT/VARTYPE
---------------------------------------------------------------
24 160 1 DM1 ---------> 21 2 1 CF1
***** WARNING *****
UNIT/TYPE/INPUT/VARTYPE CONNECTED TO UNIT/TYPE/OUTPUT/VARTYPE
---------------------------------------------------------------
18 2 3 TE1 ---------> 25 164 1 SF1
This problem is similar to the problem posted in mail list by Jeff Thornton
(Subject: Re: Question about warning in TRNSYS).I am just wondering will this
problem affect the final output?
Sharath Nellutla
****************************************************************************************
Thermal Energy System Specialists (TESS)
David BRADLEY 2916 Marketplace Drive - Suite 104
Project Engineer Madison, WI 53719
Phone: (608) 274-2577 USA
Fax: (608) 278-1475
E-mail: bradley@tess-inc.com
Web Pages: http://www.tess-inc.com and http://www.trnsys.com
"Providing software solutions for today's energy engineering projects"
****************************************************************************************